Reply With QuoteLock Atr
What sort of ATR is this?
ATR = 3B B2 11 00 10 80 00 02
This is what I can now get from my once mighty whitey!!
Leroy
Last edited by LeroyPatrol; 19-11-08 at 11:52 PM. Reason: forgot a byte
| Look Here -> |
Lock Atr
AT88SC0204C i think.........
try using panda loader and see if card will 'clean'....
Thought I had seen before
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
in GUP yes it says locked. I then can get it to clean now but when it loads a bin the status bar stops anywhere between 25-45%
Leroy
3B B2 11 00 10 80 00 02
Atmel memory card AT88SC0204C (Atmel memory card)
From some on the net.
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
In Gup make a OS file from your BIN file LOCK the card and load the OS file you made
I can't even get that ATR back now......
Leroy
Check out this thread.Originally Posted by LeroyPatrol
Sorry mr electricity missed your link.
Progressing ????
I can't fooking believe this!!!
ATR = 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 35 2E 33 9E : Irdeto ATR
I thought I have nothing to loose now so have a look at all the crap I have downloaded and came across this gs loader. It was a rar file and I didn't have the software on this lappy so I wasn't going to worry about it. But what the hell., I downloaded the rar software. Anyway it contained a panda loader but probably an older version as it has no clean button. Now with this newer one if it can't get an ATR reply it doesn't attempt to load. This older version with no clean button must load the bin on unconditionally and that's how I got my ATR back.
But (there's always a but) it now behaves like I expect with the newer panda loader wrt to cleaning cards and programming. Gave it an emk hit but no pics using my purple cam. I would expect to get them nearly straight away for 20secs or what ever almost instantly becasue I gave it an emk hit via gup.
Leroy
Last edited by LeroyPatrol; 20-11-08 at 09:53 AM.
Sounds like it's making a comeback Leroy
So still no pics?
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
still no pics..... I'm going to leave it in the cam now and head off to bed. Usually I'd have pics by now.
Leroy
Bummer dude, lets hope the over night gamma fairies will come to your rescue.
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
Good stuff. Not just a fisherman
lol....but still no picsGood stuff. Not just a fisherman
Leroy
Thanks for the all tips fellas. I think I'll try INFO's suggestion above about making an OS file from the BIN through GUP tonight unless someone has a good reason why I shouldn't?
Leroy
I think you need the Bin which has the correct details in it........the all mighty Aus* bin file to get it going again. I think it might be up that creek without a paddle........
Just a thought
Dan
if you believe, miracles can happen...Woohoo
Well card was all programmed and I thought i would stick it in my purple cam last night and up pics will come! But nope. A nice little birdie told me to stick it back in my GW server. I enabled emms from the humax and no pics so went and had dinner and the combination of spagetti and my special meat sauce was delicious....sorry, back on topic! Checking after dinner....pics!!! Ha a very elated Leroy
Thanks to all.
Leroy
Looks like the cat is now out of the bag, Looks like anyone cam now make a card with this info
Adobe.
Posting Permissions
Bookmarks